Digital Night Vision Scope Quick Start Guide
Thermal Image Scope English Wärmebild-Zielfernrohr Deutsch Monoculaire à imagerie thermique Français Mira telescópica térmica Español Mira de Visão Térmica Português Termocannocchiale Italiano Termovizní zaměřovač Čeština Termografický objektív Slovenčina Kamera termowizyjna Polski Éjjellátó távcső Magyar Lunetă cu termoviziune Română Thermische beeldscoop Nederlands Termisk kikkertkamera Dansk Termisk kamera Norsk Lämpötähtäin Suomi Kikarsikte med värmeavbildning Svenska Теп
A I II 1
B C 2
D 3
English 1. Brief Description The digital night vision scope can perform in all ambient light. It has an advanced HD sensor and a high resolution OLED display, which provides full-color clarity in daytime and classic black & white viewing at night. The traditional-style tube meets the needs of professional hunters who value traditions and seek technological superiority, ensuring an extreme detection range of up to 600 meters.
4 5 6 7 8 9 Battery Install the device battery in it. Compartment ● Press: switch reticle Wheel ● Hold: enter/exit menu ● Rotate: switch digital zoom ● Press: standby mode/wake up device Power Key ● Hold: power on/off For models with laser rangefinder: Laser Key ● Press: measure the distance with laser ● Hold: FFC ● Press: capture snapshots Capture Key ● Hold: start/stop recording Diopter Adjustment Adjust the dioptric correction. Ring 10 Eyepiece View the target.
1. Turn the battery cover anticlockwise to loosen it. 2. Insert the battery into the battery compartment with the positive mark inward. 3. Turn the battery cover clockwise to tighten it. Install Battery in Laser Rangefinder (Page 2 – C) Steps 1. Turn the battery cover anticlockwise to loosen it. 2. Insert the battery into the battery compartment with the positive mark inward. 3. Turn the battery cover clockwise to tighten it. Note: Take the battery away if you do not use the device for a long time. 4.
Trademarks Acknowledgement Trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union.
Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● Use of the product must be in strict compliance with the local electrical safety regulations. Transportation ● Keep the device in original or similar packaging while transporting it. ● Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper.
instructions provided by the battery manufacturer. ● Make sure the battery temperature is between 0°C to 45°C (32°F to 113°F) when charging. ● For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur. ● Do not charge other battery types with the supplied charger. Confirm there is no flammable material within 2 m of the charger during charging. ● DO NOT place the battery near heating or fire source. Avoid direct sunlight.
● DO NOT aim the lens at the sun or any other bright light. ● When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out. Emergency ● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Laser When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out.
UDB
