User Manual

OPERATING INSTRUCTIONS
PAGE 8
STEP 2:
Move the tractor to position the quick hitch's lower hooks below the implements bushings or lower
hitch pin. Position the hook of the quick hitch below the mast pin of the implement.
STEP 3:
Raise the a-arms of the tractor to lift the implement. Verify that the bushings or lower hitch pins set
completely within the quick hitch lower hooks and the mast pin captured by the quick hitch upper
hook.
STEP 4:
Connect the driveline from the implement to the tractor if the implement requires. See the tractors
owner's manual for instructions on how to connect a driveline.
EXCEPTIONS:
The CAT 1 quick hitch allows the use of non-standard implements.
If the mast pin or the lower hitch pins of the implement do not set all the way in the hooks
it might be necessary to raise or lower the top hook of the quick hitch. It may require a few
tries to get the hook in the right location.