Instructions / Assembly

11
TROUBLESHOOTING GUIDE
PROBLEM CAUSE REMEDY
No Propane Gas at Burner
Check that gas tank valve is
open. Turn control knob to
“ON” and push control knob
in. Make sure tank has
propane gas.
No Spark at Electrode
Check that AAA battery is
installed with negative (-)
end first and has a charge.
Check that the wire is
connected to the ignition
module. Check that the
electrode is not cracked or
broken.
Burner won’t light
Lack of oxygen
Remove excess lava rocks
or fire ices from around the
ignition well.
Thermocouple not in flame
Check that the tip of the
thermocouple is even with
the top of the ignition well.
Remove any fire ices from
the igntion well.
Thermocouple connection
at the main control valve is
loose
Tighten the thermocouple
nut at the back of the valve.
Burner won’t stay
lit after lighting
No fire ices on Burner
Cover the burner with fire
ices per the instructions