Use and Care Manual
Table Of Contents
6
W
FIREPIT BASE FP3419 1
INSTALLATION
1. Carefully unpack all items from the box. Place the base in the final position. There must
be a minimum of 24 in / 60.96 cm of clearance from the side of the table top to any
combustible walls.
2. Place the firepit tabletop (This product does not include the tabletop, sold separately)
onto the firepit base. Secure the tabletop to the firepit base by using the 1/4 x 20 mm bolts
and washers that are provided. See Figure 3.
Figure 3
3. Place the burner pan protective ring into the firepan/burner assembly as shown in
Figure 3. Align the holes in the burner pan protective ring with the pre-drilled holes on the
firepan/burner assembly. Secure the burner pan protective ring to the firepan/burner
assembly by using the three M4 screws as shown in Figure 4.
Figure 4