Service manual

X/P/K281C Operating and Service Manual 11
Connector Types
Connector Types
Pin depth is the distance that the center conductor mating plane differs from
being flush with the outer conductor mating plane. The pin depth of a
connector can be in one of two states, protruding or recessed.
Figure 4, Figure 5, and Figure 6 show a visual representation of proper pin
depth for connector types for standard and option models.
Table 7 Connector Types for Standard and Options
Figure 4 Type-N Connectors
X281C P281C K281C
Standard 7-mm 7-mm APC-3.5 mm female
Option 012 N-male Not available APC-3.5 mm male
Op[tion 013 N-female Not available Not available
Type-N Male Connector Type-N Female Connector
Outer Conductor
Mating Plane
Outer Conductor
Mating Plane
Center Conductor
Mating Plane
Center Conductor
Mating Plane
0.207 inch (5.258 mm)
minimum
0.207 inch (5.258 mm)
maximum