User`s guide

Using the Agilent VEE Development Environment Chapter 1
VEE User’s Guide 67
Figure 35 Example: Adding a Noise Generator Object
1 Delete the line connecting the Function Generator and
Waveform (Time) objects in the original program. Click
the Delete Line button on the toolbar and then click the
line. Or, press and hold Shift+Ctrl and click the line.
2 Minimize the Function Generator to its icon.
3 Add the Noise Generator object (Device ⇒ Virtual Source ⇒
Noise Generator).
4 Add the A+B object, using Device ⇒ Function & Object
Browser.
The Function & Object Browser is shown in Figure 36.
For Type, select Operators. For Category, select
Arithmetic. For Operators, select +.) Click Create Formula
and place the object in the work area between the
Function Generator and the Waveform (Time) object.
Minimize the A+B object.
NOTE
The VEE programs for many of the lab exercises and programming
examples in this manual are included in VEE, under Help ⇒ Open
Example... ⇒ Manual ⇒ UsersGuide.