User`s guide

58 VEE User’s Guide
1 Using the Agilent VEE Development Environment Chapter
• Click Deg (or the arrow) in the Function Generator object
and change the phase units to Rad. Next, click the Phase
value field and enter the value PI. Run the program and
note the phase shift in the displayed waveform. Then,
change the Phase value back to 0 and the units back to
Deg.
• The y- axis limits of the Waveform (Time) object are preset
to - 1 through 1. Click the y- axis name Mag to open a
dialog that lets you change the settings. Click the fields
for Maximum and Minimum to change the limits to 2 and
- 2. The waveform is displayed within the new limits. To
change similar parameters for the x- axis scale, click Time.
Printing the Screen
9 Continuing with the same example, to print the screen,
select File
⇒ Print Screen. On Windows, the dialog box in
Figure 30 appears.
Figure 30 Printing the Screen