User`s guide

54 VEE User’s Guide
1 Using the Agilent VEE Development Environment Chapter
Try moving one of the objects by dragging on its title bar.
(Do not drag a pin or terminal, or a line will appear.) The
line automatically reroutes to the logical path between the
two objects.
If the lines appear to be scrambled, use Edit ⇒ Clean Up
Lines to reroute the lines in the program.
Running a Program
5 Continuing with the same exercise, click the Run button
on the toolbar to run the program, or use Debug
⇒ Run.
The program displays a 100 Hz Cosine wave in the
Waveform (Time) display as shown in
Figure 26. (Your
object might have a different frequency, which is not
important to the example.)
Figure 26 Running a Program
In addition to the Run button on the toolbar, you can use
the Stop, Pause, and Step buttons on the toolbar to control
the program. If you pause a running program, use the