User`s guide

Using the Agilent VEE Development Environment Chapter 1
VEE User’s Guide 47
In an object’s open view, the data input and output pins
appear as input and output terminals. (If the object is in
icon view, double- click it to switch to open view.) The
terminals carry detailed information such as the name of the
terminal, and the type and value of the data being
transmitted. The terminal labels are visible only in the open
view, and only if the Show Terminals option is turned on for
that object (see Properties... in the object’s menu).
For example, Figure 19 includes two Formula objects. The
Formula object on the left shows the terminal labels A and
Result. The Formula object on the right has Show Terminals
turned off, and the labels are not visible.
Figure 19 Show Terminals on an Object
To turn Show Terminals ON or OFF, select Properties from
the object menu. The properties window appears on the left
side of your screen. Select the property ShowTerminals and
set it to True, (see Figure 20).
NOTE
For more information, refer to “Following the Order of Events Inside an
Object" on page 109.
Show terminals
is turned on
Show terminals
is turned off