User`s guide

42 VEE User’s Guide
1 Using the Agilent VEE Development Environment Chapter
Figure 15. (A line appears behind the pointer as you move
from one pin to the other.)
2 Release the cursor and VEE draws a line between the two
objects. Notice that if you reposition the objects, VEE
maintains the line between them.
Figure 15 Creating Data Lines Between Objects
Deleting Data Lines Between Objects
Press Shift-Ctrl and click the line you want to delete.
-OR-
Select Edit ⇒ Delete Line and click the line you want to
delete.
NOTE
For more information on pins, see “Understanding Pins and Terminals" on
page 46.
Data Output Pin
Data Input Pin