User`s guide

Using the Agilent VEE Development Environment Chapter 1
VEE User’s Guide 41
Editing Objects
There are several ways to edit objects in VEE. Different
editing menus display different choices. Choose an editing
menu or icon as follows:
Click Edit on the VEE menu bar to display the Edit menu,
and select the operation you want. The commands in the
Edit menu are the same for all of VEE.
-OR-
Click on an icon on the VEE toolbar. The VEE toolbar
contains icons for frequently used editing commands such as
Cut, Copy, and Paste.
-OR-
Open the object’s object menu by clicking on it, and select
the operation you want. Object menus include editing
operations specific to an object, such as the Properties
menu, that are not located in the main Edit menu. The
commands in the object menu also vary depending on the
type of object. For example, compare the object menus for
the Device ⇒ Formula and I/O ⇒ To ⇒ File objects. The two
menus contain different choices that are specific to the
object.
-OR-
Place the mouse pointer anywhere on a blank work area
space and click the right mouse button. A pop- up Edit
menu appears.
Creating Data Lines Between Objects
1 Click on or just outside the data output pin of one object,
then click on the data input pin of another, as shown in
NOTE
Inactive menu items appear in a different shade than active items (they are
“grayed out”). For instance, the Cut, Copy, and Clone operations in the Edit
menu appear in a different shade from active menu items until an object is
highlighted in the work area