User`s guide

Appendix
VEE User’s Guide 541
Test Sequencing
Using the Test Sequencer, Step 1
Create a simple UserFunction called UpperLimit that is a
pop- up panel with a Real64 Slider and a Confirm (OK) object.
Send the output of the slider to a global variable called UpLimit
and also to an output terminal. Create a Sequencer object, and
configure test1 in the Sequencer as an EXEC transaction that
calls UpperLimit.
Create another function called AddRand that simulates the test
you might call. This function should add an input value to a
random value (0 to 1). It will have one input pin and one output
pin.
From the Sequencer, create test2 to call AddRand and send in a
zero. Test the return value to do a limit comparison less than
the global UpLimit value. If it passes, then return "PASS" +
test2.result. If it fails, return "FAILED" +
test2.result. Put an Alphanumeric display on the Return
pin of the Sequencer.
After the Sequencer object, ping a Get Variable object (UpLimit)
and another Alphanumeric display. Run the program several
times.
Solution—Using the Test Sequencer, Step 1
Figure 307 shows a solution for the first step of using the
Sequencer.