User`s guide

462 VEE User’s Guide
12 Optimizing Agilent VEE Programs Chapter
a new feature from VEE 6.0, you should change the execution
mode to VEE 6. Otherwise, the VEE 5.0 program may not run
correctly.
To change the execution mode, follow these steps:
1 From the main VEE menu, click File ⇒ Default Preferences, or
press the Default Preferences button on the tool bar as
shown in
Figure .
Default Preferences Button on Toolbar
2 In the General folder (already displayed, since it is the
first folder), under Execution Mode, select VEE 6.0 as
shown in
Figure 262. In the same folder, make sure that
Disable Debug Features is not selected. Click OK.
Default Preferences Button
Execution mode
set to VEE 6
Disable Debug
Features turned
OFF (not
checked)