User`s guide

Test Sequencing Chapter 10
VEE User’s Guide 391
Now use the Formula object to extract part of the data to
analyze. This exercise uses the results of test1 for all three
runs as an example, and finds the mean of that array.
4 Select Device ⇒ Formula and place it below the display.
Connect the Formula input pin to the output of the Collector.
Change the Formula input field to read:
a[*].test1.result. Connect a mean(x) object to
Formula, and an AlphaNumeric display to mean(x).
The a refers to the array on the input terminal A. Test1.result
accesses the proper field. All runs will be shown in an array.
(A[0].test1.result would refer to the first run only, for
example.)
5 Run the program. It should look like Figure 217.
Figure 217 Analyzing Several Runs of Sequencer Data