User`s guide

376 VEE User’s Guide
10 Test Sequencing Chapter
Figure 207 Accessing Logged Data
5 Change the formula to read Log.test1 and run the program
again. It should retrieve the entire record for test1, which is
indicated by the braces around the three values in the
display.
6 By changing the formula, you can access the result, pass,
name, and other fields in the test1 and test2 records. Select
Logging tab in the Properties box and add the Nominal and
Time Stamp fields to the logged records. Access these new
fields with the Formula object.
NOTE
Each test creates a record, named with the test name, as it executes
within the Sequencer. This record can be used in subsequent tests. For
example, you could enable test2 if test1 passed (ENABLED IF: test1.pass
== 1). If you need to access test data in an expression field while the test
is still running, test data is stored in the temporary record thistest.