User`s guide

366 VEE User’s Guide
10 Test Sequencing Chapter
Creating a Test Execution Order
In this lab you will simulate test results using the random()
function, establish a test execution order, learn how to modify
that order, and retrieve specific data from the logged results.
Lab 10-1: Configuring a Test
1 Select Device ⇒ Sequencer and place it in the upper- left work
area.
2 Select Display ⇒ AlphaNumeric display, place it below the
Sequencer, increase its width, and connect the Sequencer
Log output terminal to the Alphanumeric data input.
3 Double- click the Sequencer transaction bar to get the
Sequence Transaction dialog box. Set the fields as follows.
NOTE
The example explains how to implement the random() function with a
certain range of test results expected, but you can use the same principles
to configure other tests.
NOTE
As you edit the fields, remember to click on new fields to modify them or
use the Tab key to move forward to different fields. Use the Shift-Tab
keys to move the cursor backward. Press the Enter key only when you
are done editing the dialog box.
Table 3 9 Sequencer Transaction Fields
Field Name Description
TEST: The default name is test1, which you can use. This is just
the label for the test in the Sequencer. It is not the test
function itself.