User`s guide

230 VEE User’s Guide
5 Storing and Retrieving Test Results Chapter
Unbuilding a Record in a Single Step
To extract all record fields and get a list of the field names
and their types, use the UnBuild Record object.
1 Open the setfield.vee program. Delete all objects after Build
Record.
2 Select Data ⇒ UnBuild Data ⇒ Record and place it under
Build Record, switch the open view, and connect the
output of Build Record to the input of UnBuild Record.
Add another data output pin to UnBuild Record and
rename the A, B, and C outputs to the field names:
testname, time, and data.
3 Select an AlphaNumeric display and clone it four times.
Connect the five displays to the five output terminals on
UnBuild Record. You will have to enlarge the displays for
Name List, Type List, and data to accommodate arrays.
Also, reconfigure the time display to present time in
day/month/year and hours, minutes using a 12 hour
format.
4 Run the program and save it as unbuild.vee. It should look
like
Figure 138.