User`s guide

164 VEE User’s Manual
3 Easy Ways to Control Instruments Chapter
Figure 105 Selecting a VXIplug&play Driver
Select the hpe1412 driver, click OK to return to the Instrument
Properties dialog box, and click OK to return to the Instrument
Manager. There should now be an entry for Instrument(@(NOT
LIVE)).
4 Highlight Instrument(@(NOT LIVE)), and under Create I/O
Object, select Plug&play Driver. Click to place the object.
To make measurements with the instrument, you need to
configure I/O transactions that use C functions in the
VXIplug&play driver. The driver provides you with panels to
pick the right functions to use.
5 Double- click on the transaction bar labeled <Double- click to
Add Function>, and Select a Function Panel is displayed as
shown in
Figure 106. Figure 107 shows the hierarchy of
functions in the function panel. Notice that Help for the
item selected is displayed in the dialog box.
NOTE
In VEE, a VXIplug&play driver resembles a Direct I/O object.