User`s guide

144 VEE User’s Manual
3 Easy Ways to Control Instruments Chapter
Moving to Other Panels on the Same Driver
Most drivers have more than one panel to simplify the user
interface. To move to a different panel, click Main Panel in
the object to get a menu of panels.
1 In the Panel Driver object, click Main Panel and select
Sweep in the Discrete Component MENU presented as
shown in
Figure 89.
2 Click OK to display the Sweep Panel. You can also look at
the other panels to see what is available.
3 Click OK to return to the Main Panel.
Figure 89 Sweep Panel in Discrete Component Menu