User`s guide

134 VEE User’s Manual
3 Easy Ways to Control Instruments Chapter
By default, there are no instruments configured, and this
example assumes that no instruments appear in the
Instrument Manager list.
2 In the Instrument Manager dialog box, make sure My
Configuration is highlighted, and click Add... under
Instrument. The Instrument Properties dialog appears, as
shown in
Figure 83.
Figure 83 Instrument Properties Dialog Box
The entries in the Instrument Properties dialog box are as
follows:
NOTE
If you have any instruments connected and powered on, VEE can find the
instruments and automatically find the drivers for them. For more
information about automatically finding and configuring instruments, refer
to the online Tutorials under Help ⇒ Welcome ⇒ Tutorials in the main
VEE screen.