User`s guide

Easy Ways to Control Instruments Chapter 3
VEE User’s Guide 133
Configuring an Instrument
With VEE you can develop programs without the instruments
present. In this exercise, you will configure an oscilloscope for
use with a panel driver. Then you will add the physical
instrument to the configuration.
Lab 3-1: Configuring an Instrument without the Instrument Present
1 Select I/O ⇒ Instrument Manager.... Move the dialog box
to the upper-left work area by clicking and dragging its
title bar, as shown in
Figure 82.
Figure 82 The Instrument Manager Box