Technical data

Instrument Controls 3
Agilent VEE - Practical Graphical Programming 59
Exercise 3.2 - Monitoring Passive Devices
This exercise will show you how to set up and measure temperature using
a thermocouple and a digital multimeter for VEE Pro access.
Reference: Practical Temperature Measurements, Agilent Technologies
Application Note 270, Publication Number 5965- 7822E.
Installing the 34970A data acquisition switch unit
1 Turn off your computer.
2 Install the 34970A unit in the appropriate slot as noted in your card
list. For a photograph of this switch unit, see Figure 3- 2.