Technical data

Instrument Controls 3
Agilent VEE - Practical Graphical Programming 57
Exercise 3.1 - Selecting an Instrument
This exercise will show you how to set the parameters within VEE Pro to
configure an actual instrument driver, such as an oscilloscope.
Open your VEE program and clear your Work Area and maximize it.
1 Open EXER02.1. It should look like Figure 3- 1. Save it as EXER03.1
immediately.
Figure 3-1 Selected Agilent54504a @ Not Live
NOTE
EXER02.1 showed you how to add new instruments to the Instrument Manager.