Technical data

56 Agilent VEE - Practical Graphical Programming
3 Instrument Controls
Overview
Exercise 3.1 Selecting an Instrument
This exercise will show you how to set the parameters within VEE Pro to
configure an actual instrument driver, such as an oscilloscope.
Exercise 3.2 Monitoring Passive Devices
This exercise will show you how to set up and measure temperature using
a thermocouple and a digital multimeter for VEE Pro access.
Exercise 3.3 Interacting with Equipment
This exercise will show you how to send a single text command, or an
expression list, to an active instrument using Direct I/O.
Exercise 3.4 Integrating National Instruments Hardware
This exercise will demonstrate how to set up National Instrument drivers
in VEE Pro.