Technical data

42 Agilent VEE - Practical Graphical Programming
2 Instrument Communication
Figure 2-2 Instrument Manager programmed for a virtual scope
13 Click Open; then click OK when Advanced Instrument Properties
appears.
14 Return to the Instrument Manager box; click the Save button.
15 Select Menu Bar => I/O => Instrument Manager; highlight scope(@(NOT
LIVE)); under Create I/O object, click Panel Driver - the hp54504a @
(NOT LIVE) object will appear on the screen. See Figure 2-3.
NOTE
• An instrument object named Scope using the driver file hp54504a@(NOT LIVE) is
now in your list of available instruments. It does not have a bus address specified
because it is NOT LIVE at this time.
• You can develop your program in this mode and add an address later when there is
a live instrument.
• If you already have an Agilent instrument available, then refer to the Owner's
Manual for the instrument and the Agilent I/O Libraries Suite Manual.