Technical data

40 Agilent VEE - Practical Graphical Programming
2 Instrument Communication
Figure 2-1 The Instrument Manager window
2 Move the dialog box, by dragging its title bar, if you so desire; "My
Configuration" should be highlighted.
3 Click Add under Instrument. This displays the Instrument Properties
window, which presents the following fields:
Add Interface/Device
: Select GPIB from the following list - GPIB, ASRL,
TCPIP, USB, NIDAQ, VXI, GPIO.
Instrument Properties
:
Name: Enter scope name. (Use a naming convention that will be
easily understood and reused by the other team members. Later, you
will save time by choosing already existing virtual instruments. Here
we have used "hp54504a")
Interface: Select GPIB if not already preselected. (Could later change
this to USB or LAN)