Technical data

26 Agilent VEE - Practical Graphical Programming
1 The VEE Pro 8 Fundamentals
Selecting Properties with your mouse right button
1 Click on Menu Bar => View => Properties; the UserObject Properties
window will appear.
2 Open the oscilloscope description box again. See Figure 1- 20.
Figure 1-20 UserObject Properties window Displayed with Description Showing
Sizing an object
1 Go to the upper- right corner of the Noisy Cosine UserObject. Click the
mouse left button on the middle Noisy Cosine button in the upper- right
corner (this will cause the UserObject to reduce in size so the Main
window is observable. Clicking it again will cause it to once more fill
the screen; this middle button is a toggle). Maximize the Noisy Cosine
so it fills the screen.
NOTE
If you lose the VEE Pro 8 screen, then you may click on the Program Explorer Main
or Noisy Cosine to re-acquire it.