Technical data

The VEE Pro 8 Fundamentals 1
Agilent VEE - Practical Graphical Programming 23
Displaying a running program with a virtual oscilloscope
1 Select Menu Bar => Display => Waveform (Time); place it to the right of
the Noisy Cosine object. Change its Title to Oscilloscope.
2 Change its Y Scale name from Mag to Temp.
3 Change its Trace Info name from Trace 1 to Degree C.
4 Connect the Noisy Cosine output pin (Temp) to the oscilloscope input
pin Degree C.
5 Move the oscilloscope so its display shows fully in the Main window.
6 Select Menu Bar => Display => Alphanumeric and place it to the right
of the Waveform (Time) display. Lengthen its icon vertically; connect
the Alphanumeric input to the output (Temp) of the Noisy Cosine icon.
7 Depress the Run button; the displays will appear as shown in Figure
1- 18.
8 Save this program as EXER01.3.
Figure 1-18 The Noisy Cosine Program after running
NOTE
As you scroll down the Alphanumeric object, all 256 points (0 through 255) are
displayed.