Technical data

The VEE Pro 8 Fundamentals 1
Agilent VEE - Practical Graphical Programming 19
Changing the Waveform (Time) Mag scale
1 Click on Waveform (Time) Mag box. Turn Automatic Scaling to off.
Change the Maximum to 2 and the Minimum to - 2. Run this program
with the new scale settings.
2 Run this program; compare its results with the previously settings. See
Figure 1- 15.
Figure 1-15 A Comparison of the Two Mag Settings
3 Go to the File => Save as..., name the program EXER01.2 and save it to
your personal disk.
NOTE
If the waveform amplitude is greater than the Waveform (Time) display and "Auto
Scale" is on, the display will automatically adapt to the height and width of the
waveform. Auto Scale can be disabled and adjusted by clicking on Mag in the
upper-left corner of Waveform (Time).