Technical data

The VEE Pro 8 Fundamentals 1
Agilent VEE - Practical Graphical Programming 11
Figure 1-7 Two Connected objects
Using the Undo and Redo operations
1 Remove the connection by holding down Ctrl and Z at the same time.
The connection will be removed. Note also the two curved arrows on
the top right side of the toolbar (Figure 1- 8). The left- hand arrow is
dark and will read "Redo Line Add" to indicate that it can be applied.
Figure 1-8 Two Other Methods of Applying Undo
2 Reinstate the connection by holding down Ctrl and Y at the same time.
The connection will be reinstated. Note also the right- hand curved
arrow. It can also be used to "Redo Line Add" which is no longer greyed
out. See Figure 1- 9.