Specifications

•
•
•
•
•
•
15
4 Click OK.
Configure the Instrument
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode DCVoltage and select Configure. Click OK. The Edit
Configure dialog box appears.
3 To set a range of 1.5 volts and resolution of 1 millivolt, enter the following in the
Edit Configure dialog box:
• 1.5 in the Range field
• 0.001 in the Resolution field
4 Click OK.
Set the Trigger Delay
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode Trigger and select Delay. Click Set. The Edit Delay dialog
box appears.
3 To set a trigger delay of 0.01 seconds, enter 0.01 in the delay field.
4 Click OK.
Set the Reading Timeout
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode Measurement and select Read. Click OK. The Edit Read
dialog box appears.
3 To take a reading with a timeout of 1 second, enter 1000 in the
MaxTimeMilliseconds field.
4 Click OK. The To/From myDMM object includes an additional output node
labeled return. This will hold the value returned from the Read Measurement
operation.
Close the Session
Now that you have completed all of the driver operations, you should close the
driver session to free resources.
1 Double-click to add another operation. The Select an Operation dialog box
appears.