Technical data

Agilent VEE Pro 9.32 Quick Start Guide 9
Instrument Communication Tutorial
In this tutorial, we will connect to an instrument via the USB
interface. Ensure that the Agilent IO Libraries Suite 16.3.16603.3 is
installed before proceeding.
If you do not have a USB instrument, the tutorial for a GPIB
instrument is similar from Step 3 onwards.
1 Connect to an instrument via any USB port on your PC. Then, turn
on the instrument. The Found New Hardware Wizard dialog box
will appear. Just step through the wizard by clicking Next.
2 Launch Agilent VEE Pro, if you have not. Click the Instrument
Manager button on the toolbar.
3 The Instrument Manager tool window will appear. Click the Find
Instruments button to automatically detect all instruments
connected to your PC.
4 Click OK if the Identify Instrument pop- up dialog box appears. This
automatically identifies the instrument on the USB interface. In
this example, the Agilent 34450A 5½ Digit Multimeter is present.