User`s guide
Table Of Contents
- Agilent U8030A Series Triple Output DC Power Supply
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Operation and Features
- Constant Voltage Operation
- Constant Current Operation
- 5 V Operation
- Track Mode Operation
- Output On/Off Operation
- Memory Operations
- Memory Output Operations
- Programming the Overvoltage Protection
- Programming the Overcurrent Protection
- Keylock Operation
- System-Related Operations
- Extending the Voltage and Current Range
- Characteristics and Specifications
2 Operation and Features
Programming the Overvoltage Protection
54 U8030A Series User’s Guide
• If the OVP trip occurs on Output 2, the display shows triP
on line 2 and the OVP2 annunciator blinks.
1 Select the output channel with the OVP trip.
• Press [1] to select Output 1, or
• Press [2] to select Output 2.
• The corresponding annunciator (OUT1 or OUT2) turns
on.
2 Clear the OVP trip.
• Press the [Over Voltage] button again to clear the OVP
trip.
NOTE
If the OVP trip persists, decrease the voltage limit settings to clear the
tripping.