User`s guide
Table Of Contents
- Agilent U8030A Series Triple Output DC Power Supply
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Operation and Features
- Constant Voltage Operation
- Constant Current Operation
- 5 V Operation
- Track Mode Operation
- Output On/Off Operation
- Memory Operations
- Memory Output Operations
- Programming the Overvoltage Protection
- Programming the Overcurrent Protection
- Keylock Operation
- System-Related Operations
- Extending the Voltage and Current Range
- Characteristics and Specifications
Operation and Features 2
Memory Output Operations
U8030A Series User’s Guide 51
Program the memory output time interval
1 Edit the memory output time interval.
• Press the [Δt] button.
• The Δt annunciator turns on.
• By default, the M1 annunciator turns on indicating Δt
1
is being selected for adjustment.
• To select Δt
2
or Δt
3
, press the [Memory] button until the
corresponding M2 or M3 annunciator turns on.
• The display shows the time interval in seconds, with
the integral part on line 1 and the fractional part on
line 2.
• Press the [Δt] button to change the cursor position.
Turn the knob to adjust the value. The time interval
can be set with a resolution up to 10 ms.
• You can set the time interval within the range of 0 s to
9999.99 s.
• Press and hold the [Δt] button to save the setting.
• The display shows dOnE.
NOTE
To cancel this operation, allow the unit to idle for five seconds.