User`s guide
Table Of Contents
- Agilent U8030A Series Triple Output DC Power Supply
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Operation and Features
- Constant Voltage Operation
- Constant Current Operation
- 5 V Operation
- Track Mode Operation
- Output On/Off Operation
- Memory Operations
- Memory Output Operations
- Programming the Overvoltage Protection
- Programming the Overcurrent Protection
- Keylock Operation
- System-Related Operations
- Extending the Voltage and Current Range
- Characteristics and Specifications
U8030A Series User’s Guide V
Environmental Conditions
This instrument is designed for indoor use and in an area with low
condensation. The table below shows the general environmental
requirements for this instrument.
Environmental condition Requirements
Operating temperature 0 °C to 40 °C
Storage temperature –40 °C to 70 °C
Humidity
15% RH (relative humidity) to 85% RH at 40 °C
(non-condensing)
Altitude Up to 2000 meters
Installation category Installation Category II
Pollution degree Pollution Degree 2
NOTE
The U8030A Series Triple Output DC Power Supply complies with the following
safety and EMC requirements:
• IEC61326-1:2005 / EN61326-1:2006
• CISPR 11:2003/ EN55011:2007
• Canada: ICES/NMB-001: Issue 4, June 2006
• Australia / New Zealand: AS/NZS CISPR11:2004
• IEC 61010-1:2001 / EN 61010-1:2001 (2nd Edition)
• Canada: CAN/CSA-C22.2 No. 61010-1-04
• USA: ANSI/UL 61010-1:2004