User`s guide
Table Of Contents
- Agilent U8030A Series Triple Output DC Power Supply
- Table of Contents
- List of Figures
- List of Tables
- Introduction
- Operation and Features
- Constant Voltage Operation
- Constant Current Operation
- 5 V Operation
- Track Mode Operation
- Output On/Off Operation
- Memory Operations
- Memory Output Operations
- Programming the Overvoltage Protection
- Programming the Overcurrent Protection
- Keylock Operation
- System-Related Operations
- Extending the Voltage and Current Range
- Characteristics and Specifications
Operation and Features 2
Memory Operations
U8030A Series User’s Guide 47
Memory Operations
Up to three operating states can be stored in the
non- volatile storage locations. The storage feature remembers
the voltage and current limit value settings; OVP and OCP
on or off states; and OVP and OCP trip levels. The following
steps show you how to store and recall an operating state.
Storing an operating state
1 Store the power supply current operating state.
• Press the [Memory] button.
• The M1 annunciator will blink.
2 Turn the knob to choose the memory location for
storing the operation state.
• The M1, M2, and M3 annunciators will blink in a
round- robin manner.
3 Press the [Memory] button again to save the current
operating state in the chosen memory location.
• The display will show dOnE.
• The M1, M2, and M3 annunciators turn off.
NOTE
To cancel this operation, allow the unit to idle for five seconds.