User`s guide

X U8030A Series User’s Guide
Circuit fault condition 43
Track Mode Operation 44
Output On/Off Operation 45
Turn on or off all outputs 45
Turn on or off individual outputs 46
Memory Operations 47
Storing an operating state 47
Recalling an operating state 48
Memory Output Operations 49
Enable the memory output single operation 49
Enable the memory output loop operation 50
Program the memory output time interval 51
Programming the Overvoltage Protection 52
Set the OVP trip level and enable the OVP 52
Disable the OVP 53
Clear the overvoltage condition 53
Programming the Overcurrent Protection 55
Set the OCP trip level and enable the OCP 55
Disable the OCP 56
Clear the overcurrent condition 56
Keylock Operation 58
System-Related Operations 59
Reset to the factory defaults 59
Power-on self-test 59
Display the firmware and board versions 60
Extending the Voltage and Current Range 61
Series connection 61
Parallel connection 62