Technical data

80 U4154A Logic Analyzer Service Guide
5 Troubleshooting
d Channels 7 through 0 are already assigned by default.
Assign pod 2 channels 15 through 0 and pod 1
channels 15 through 8 by clicking and dragging from
the left- most channel box to the right- most channel
box. Your display should look like the lower picture
when you are done.
6 Select the State sampling mode and set the State Clock
options:
a Select the Sampling tab of the Analyzer Setup window.
b Select State - Synchronous Sampling.
c For State Clock, select Pod A1 Clock and Both edges.
7 Set the trigger position and acquisition memory depth:
a Set the Trigger Position to 100% Poststore.
b Set the Acquisition Depth to 8K.