Technical data

74 U4154A Logic Analyzer Service Guide
5 Troubleshooting
To run the self tests
You can run self tests on the U4154A module to verify if the
module is operating correctly. Before running self tests,
ensure that:
• you have connected all the hardware components for the
U4154A module
• created a logical module for U4154A in the Agilent Logic
Analyzer application.
• disconnected all probes from the logic analyzer module.
You use the Analysis System Self Tests window to run self
tests. Refer to the topic “Perform the Self- Tests" on page 24
to know how to run these tests.