Technical data

Testing U4154A Performance 3
U4154A Logic Analyzer Service Guide 59
8 Assign bits 2, 6, 10, and 14 of Pod 2.
9 Adjust the sampling positions using Eye Scan. Be sure to
expand “My Bus 1” and use the recommended starting
position noted on page 48. Realign any stray channels if
necessary. See page 52.
10 Determine pass or fail (1 of 2 tests). See page 54.
11 Select OK to close the “Analyzer Setup” window.
12 Switch to the Listing window by selecting the Listing tab
at the bottom of the main logic analyzer window.
13 Select the Run Repetitive icon .
14 Determine pass or fail (2 of 2 tests). See page 57.
Test the complement of the bits (Pod 2)
1 Test the complement of the bits. See page 58.