Technical data

Preparing for Troubleshooting or Performance Testing 2
U4154A Logic Analyzer Service Guide 19
To test the U4154A module
The U4154A logic analyzer module does not require an
operational accuracy calibration or adjustment. After
installing the module, you can test and use the module.
• If you require a test to verify logic analyzer’s performance
with the specifications, see “Testing U4154A
Performance" on page 21.
• If you require a test to verify correct module operation,
see “To run the self tests" on page 74.
• If the module does not operate correctly, see
“Troubleshooting" on page 67.
To clean the module
• With the AXIe chassis turned off and unplugged, use a
cloth moistened with a mixture of mild detergent and
water to clean the front panel of the module.
• Do not attempt to clean the module’s circuit board.