Technical data

General Information 1
U4154A Logic Analyzer Service Guide 15
Environmental Characteristics
For a full listing of all specifications and characteristics, see
the Agilent U4154A Logic Analyzer Data Sheet, literature
part number 5990- 7513EN available on Agilent’s web site
(www.agilent.com).
Table 2 Environmental Characteristics
Probes
Maximum
Input Voltage
± 40 V, CAT I. CAT I = Category I, secondary power line isolated
circuits.
Operating Environment
Temperature Instrument, 0 °C to 40 °C (+32 °F to 104 °F).
Probe lead sets and cables, 0 °C to 65 °C (+32 °F to 149 °F).
Humidity Instrument, probe lead sets, and cables, up to 80% relative
humidity at +40 °C (+104 °F), non-condensing.
Altitude To 3000 m (10,000 ft).
Vibration Operating: Random vibration 5 to 500 Hz, 10 minutes per axis,
≈0.2 g (rms).
Power All power supplies required for operating the U4154A logic
analyzer are supplied through the backplane connector in the
Agilent AXIe chassis in which you install the module.
Non-operating: Random vibration 5 to 500 Hz, 10 minutes per
axis, ≈2.41 g (rms); and swept sine resonant search, 5 to 500 Hz,
0.5 g (0-peak),
5 minute resonant dwell at 4 resonances per axis.
Indoor use only.
Pollution Degree 2. Normally only dry non-conductive pollution
occurs. Occasionally a temporary conductivity caused by
condensation may occur.
Storage Store or ship the logic analyzer in environments within the
following limits:
• Temperature: -40°C to +75°C (-40°F to +167°F).
• Humidity: Up to 90% at 65°C (+149°F).
• Altitude: Up to 15,300 meters (50,000 feet).
Protect the module from temperature extremes which cause
condensation on the instrument.