User`s guide

3 DC Power Supply Operation
Constant Voltage Operation
82 U3606B User’s Guide
Enable the output
8
NOTE
• The output voltage is limited by the range selected. Press [Shift] >
[Range] to select an appropriate range. You can only select a range
when the output is disabled (the SBY annunciator is illuminated).
• While adjusting the constant voltage value, you can also press
[Voltage] again or [Shift] > [Exit] to exit the edit mode.
U3606-90054_UG_EN.book Page 82 Friday, July 11, 2014 5:12 PM