User`s guide

DC Power Supply Operation 3

Constant Voltage Operation

U3606B User’s Guide 81

Select the constant voltage function

Adjust the constant voltage value

LOAD

The CV annunciator will turn on according to your selection.

Use the arrow keys to change the value.

• Press [] or [] to select a digit position or range.

• Press [] or [] to increase or decrease the value selected.

Note: If the CV annunciator is not flashing, press [Voltage] again. The output voltage

can be programmed when the output is enabled (OUT) or disabled (SBY).

To exit the edit mode

U3606-90054_UG_EN.book Page 81 Friday, July 11, 2014 5:12 PM