User`s guide

2 Operation and Features
Testing Continuity
40 U3606B User’s Guide
Probe the test points and read the display
In this example, a short is detected in the circuit under test.
Autoranging is enabled by default and the resolution is fixed at 4½ digit for continuity tests.
Test current
5
CAUTION
Disconnect circuit power and discharge all high-voltage capacitors
before measuring resistance or conductance, or testing circuit
continuity, to avoid damaging the U3606B or the device under test.
NOTE
Beeps when a short is detected
The U3606B beeps when the continuity measurement is less than or equal
to the continuity threshold. This allows you to quickly determine shorts in
the circuit under test without having to look at the display.
U3606-90054_UG_EN.book Page 40 Friday, July 11, 2014 5:12 PM