User`s guide

Introduction 1
The U3606B in Brief
U3606B User’s Guide 21
• Press [] to select the resistance (2-wire) measurement function.
• Press [] again to select the continuity test function.
Press [Shift] > [Lo Ω] to select the low-resistance (4-wire) measurement
function.
Press [Hz ms %] to cycle between the frequency (Hz), pulse width (ms), and duty
cycle (%) measurement functions related to the voltage or current path.
[1]
The
AC voltage or AC current measurement display will flash briefly before the
frequency measurement display is shown.
• Press [] to select the diode test function.
• Press [] again to select the capacitance function.
Press [Null] to enable the null math operation.
Press [Shift] > [dBm] to convert the measured voltage value to dBm.
Press [Shift] > [dBm] > [dB] to convert the measured voltage value to dB.
Press [MinMax] to store statistical data for the present readings.
Press [Shift] > [Limit] to enable the limit math operation.
Press [Hold] to capture and hold a reading within the specified variation and
threshold values.
[2]
Table 1 - 4 Keypad descriptions (continued)
Legend Description
U3606-90054_UG_EN.book Page 21 Friday, July 11, 2014 5:12 PM