User`s guide

Introduction 1

The U3606B in Brief

U3606B User’s Guide 19

Using the Shift key

To select a Shift function: first, press [Shift] (the Shift

annunciator will illuminate). Then, press the key that has

the desired label above it.

NOTE

• If you accidentally press [Shift], but do not want to perform a Shift

function, just press [Shift] again to turn off the Shift annunciator.

• If no key-press is detected 3 seconds after [Shift] is pressed, the

instrument will return to normal operation (the Shift annunciator turns

off).

To se l e c t shift functions, (1) press [Shift]

first, then (2) press the desired key. In this

example, the Lo Ω function is selected.

Shift annunciator

Table 1 - 4 Keypad descriptions

Legend Description

System-related operation

Push [Power] to turn on or turn off the U3606B.

U3606-90054_UG_EN.book Page 19 Friday, July 11, 2014 5:12 PM