User`s guide

Introduction 1
The U3606B in Brief
U3606B User’s Guide 17
6
LOG Data logging in progress
Store Store instrument state selected
Recall Recall instrument state selected
Ramp Ramp signal output selected
Scan Scan signal output selected
Error One or more errors available in the error queue
Rmt Remote interface control is active
OV Over-voltage condition active
OC Over-current condition active
7
–1.8.8.8.8.8
Primary display for multimeter operation
8
ºC Celsius temperature unit
ºF Fahrenheit temperature unit
dB Decibel unit relative to 1 dBm
dBm Decibel unit relative to 1 mW
ms Pulse width unit
% Duty cycle unit
MkΩ Resistance units: Ω, kΩ, MΩ
MkHz Frequency units: Hz, kHz, MHz
mV Voltage units: mV, V
mA Current units: mA, A
μnF Capacitance units: nF, μF
9
OUT
Output is enabled from the output terminals and remote sense (rear output)
terminals
SBY Output is on standby (disabled)
10
–1.8.8.8.8.8
Secondary display for source operation
Table 1 - 3 VFD display descriptions (continued)
Legend Description
U3606-90054_UG_EN.book Page 17 Friday, July 11, 2014 5:12 PM