User`s guide

1 Introduction
The U3606B in Brief
16 U3606B User’s Guide
2
EXT Remote sensing operation enabled
CC Constant current operation selected
CV Constant voltage operation selected
Lo Ω Low-resistance (4-wire) measurement selected
Square-wave output selected
3
–1.8.8.8.8.8
Secondary display for source operation
4
S1 Output range S1 selected — 30 V/1 A or 30 V/100 mA
S2 Output range S2 selected — 8 V/3 A or 1000 mV/3 A
S1S2
Autoranging enabled for constant voltage, constant current, and square-wave
output operations
V Voltage unit: V for constant voltage operation
A Current unit: A for constant current operation
Hz Frequency unit: Hz for square-wave output
DC symbol
AC symbol
5
Limit Limit math operation enabled
Auto Autoranging selected
DC measurement selected
AC measurement selected
AC+DC measurement selected
Table 1 - 3 VFD display descriptions (continued)
Legend Description
U3606-90054_UG_EN.book Page 16 Friday, July 11, 2014 5:12 PM