User`s guide

1 Introduction
Preparing the U3606B
8 U3606B User’s Guide
Rack mount the instrument
You can mount the U3606B in a standard 19- inch rack
cabinet using one of the two optional kits available.
Instructions and mounting hardware are included with each
rack- mounting kit.
To rack mount a single instrument, order 34190A.
Figure 1-1 Single rack mounted U3606B
To rack mount two instruments side- by- side, order
1CM011A. Be sure to use the support rails inside the rack
cabinet. This configuration only works for two U3606B
mounted side- by- side.
Figure 1-2 Two U3606B rack mounted side-by-side
Remove the carrying handle and the front and rear rubber
bumpers before rack- mounting the instrument.
1 To remove the handle, rotate it to a vertical position and
pull the ends outward.
2 To remove the rubber bumpers, stretch a corner and slide
it off.
U3606-90054_UG_EN.book Page 8 Friday, July 11, 2014 5:12 PM